ES3-8 to ES9-700
Type
ES3-8 To ES9-700
- Axial flow fan
- Diameter: 300 to 900 mm
Performance range
- Volumetric flow up to 22m³/s (1320/min)
- Total pressure increase up to 3700 Pascal
- Motor shaft power from 0,8 to 75,0 kW
Characteristics
DESIGN
Axial-flow impeller as cast part from EN AB 43000, spark
protected. Thrust collar made of EN AB 43000 or brass, with guide vanes, profiled blades with no edges in the flow surface, sturdy steel housing, foot mounting.
Control
Direct starting
Optional: star-delta, pole-changeable, variable speed
Drive
- Voltage ranges 400 – 1140 Volt
Three-phase AC squirrel-cage motors S1
in special design - Flame-proof enclosure protection
“d” or “de” according to DIN EN 60079-1 - Protection class >= IP 55; insulation class F, tropicalised
- Energy efficiency class >= IE2
- Terminal box position: top
- PTC thermistor
- Optional: Hydraulic drive sizes from
Ø 300 mm to Ø 600 mm
COATING
Primer with top coat, alkyd resin Silac,
total layer thickness min. 180 μm
Standard colour: Pure white (RAL9010)
OPTIONs
Sealed motor, dust disks, hard coated wheel, special coating, vibration dampers, stall-point monitoring, impact protection,
VFD compatibility compatible, cold environment, motor monitoring,
incr. efficiency class, vibrations sensors, volume flow, pressure difference and gas monitoring, adjustable blades, bifurcated fan, voltage switchable or solderable
Variant as bifurcated fan
Hint: PU version with two motor power stages.
Example: ES9-700/110 means first stage 11 kW,
main stage 70 kW (characteristic curves for both stages included in scope of delivery)
Technical execution according to
Machinery Directive: Directive 2006/42/EC
ErP ecodesign Directive 2009 / 125 / EC
Explosion protection according to guideline 2014 / 34 / EU
Test bench run according to DIN EN ISO 5801 / 2017
a member of
